Pumptro_Sites

Pumptron Australia Pty Ltd

Protection, Control & Automation for Submersible Pumps


Pumptron can be installed next to the bore or at a distance. The picture above is an example of an installation next to the well.	Pumptron works automatically and unattended.. Here we can see Pumptron at a fair distance from the house.


In this installation Pumptron is in a shed approximately 380 metres from the bore. The shed can be seen amongst the bush.	Inside the shed from the picture on the left. Pumptron is installed upon an old electric board.


Typical installation feeding a tank. Using a float switch Pumptron works completely unattended. Location Cattai, NSW, Australia	Punptron installed in the switch board room of a house. Location St. Ives, NSW, Australia


Installation of Pumptron with a ten KW Pump. Water flow rate = 4.5L/s The pool is for mineral removal.	Another view of the bore on the left.